F.R. Snowboarding Community

News: Hey Frosty Rider is now on Twitter.  Follow the sweet tweets @frostyrider

[EN] [PL] [ES] [PT] [IT] [DE] [FR] [NL] [TR] [SR] [AR] [RU] Topic: Advice Please!  (Read 856 times)

0 Members and 1 Guest are viewing this topic.

Offline tahoejunkie

Advice Please!
« on: September 04, 2008, 05:48:53 PM »
Hi everybody!  Hope everyone had a good summer...
 
It's about that time!  I cant wait for the winter, counting down the days til I can dust off my equipment and hit the slopes!  In keeping with my usual tradition, I'm doing some research, looking for good deals on lift tickets and new stuff, and I found a deal that's too good to pass up.
 
I recently found a Burton Custom 08 snowboard on sale for $209!  I googled this type of snowboard and so far found mostly positive reviews.  I'd like to see what everyone else thinks before I take the plunge, so if you know anything about this SB (good or bad) pls let me know.  In case you were wondering:
 
 
I've been riding about 2 years now, but I go almost every weekend (not easy when the slopes are 3 hours away!)
 
I consider myself an intermediate rider.  My focus this season will be on perfecting my technique and gaining more speed and control.  I also want to get better at the ramp jumps, maybe try a few new tricks.
 
I prefer an all mountain board, and I spend about 60% of my time on runs, 40% at the park.  I do mostly jumps, havent tackled the rails yet but looking forward to it.
 
My current board is called Oxygen, its a used board I bought from craigslist.  I've used it since I started SBing, but I found that I've outgrown it.  I have a brand new pair of Burton boots and Burton Custom bindings, so those are set. 
 
Thanks!
If riding is wrong, then I dont wanna be right!

Offline Frosty

Re: Advice Please!
« Reply #1 on: September 04, 2008, 06:47:48 PM »
Wow, THAT is a sweet deal!  Cannot go wrong with any of the post 2004 Burton Custom boards.  Great all-around board.  Make sure you have the binding disks that support the stupid Burton proprietary 3-hole bolt pattern :P


Offline tahoejunkie

Re: Advice Please!
« Reply #2 on: September 05, 2008, 03:12:20 PM »
Thanks frost man!  But if I have a pair of Burton bindings already, do I still need new plates? wont the Burton bindings be ready for a Burton board?

If they cant that would be really retarded
If riding is wrong, then I dont wanna be right!

Offline Frosty

Re: Advice Please!
« Reply #3 on: September 05, 2008, 05:43:57 PM »
Bindings come in two parts.  One is the major binding part and the other is the center disk that the binding screws get put through (on the base plate).  That is the part we are concerned with. 

The disks come in three types based on the hole patterns they accommodate: 

A) 4-hole pattern (most common)
B) 3-hole pattern (for burton boards' proprietary hole pattern)
C) Universal (not very common)


Some bindings come with 3-hole or 4-hole disks.  Some come with both.

So in your case, if you were using your Burton bindings on a different board that has a 4-hole pattern then you most likely have the 4-hole disk in there.  If you want to use you Burton bindings with a Burton board, you would need teh 3-hole disks in there.

Tags:
Tags:
 

Related Topics

  Subject / Started by Replies Last post
11 Replies
1257 Views
Last post November 16, 2008, 01:40:59 PM
by Travis Hightower
2 Replies
354 Views
Last post December 22, 2009, 11:06:42 PM
by softee77